Skip to content

20X50 House Design With Elevation | 1000Sq.ft.

Hello Home CAD Community, Today we are here with a Home Design Project
20X50 House Design

20x50 house design

In this blog, we will be discussing the Floor Plan, Elevation and Walkthrough Of above mentioned House Design

Before starting this blog I would Like you to Check Out our YouTube Channel

FloorPlan Hub & Home CAD

Advertisement

Let us Start With our 20X50 House Design Project

20X50 Floor Plan

Ground Floor Plan

  • Number Of Bedrooms: 01 with attached washroom
  • Dining and Drawing Room are Provided at the Ground Floor Plan with a Common Washroom
  • Kitchen Has an area of 9’4″ by 12′ with an attached store of 6 feet by 4 feet
  • The Staircase is Provided from inside the house.

First Floor Plan

  • Number Of Bedrooms: 03, Two with Attached washroom and one with common washroom(shown is floor plan)

For the Ventilation Purpose of the house, we have provided two OTS(Open to Sky) as Shown In plan.

The front setback is of the house is 6 feet. We haven’t provided setback from the sides as the width of the plot was 20 feet only.

The Stairs Are provided from inside the house as the floor plan is designed for one joint family

20×50 Front Elevation

20X50 3D House Design

DAY View

Night View

20X50 House Design Walkthrough

Download 20X50 House Design Project Files

After Downloading the 20X50 Home Design Project File You Will get

AutoCAD Project Files

>Floor Plans
>Elevation

>Column Layout Plan

Revit Project Files

>Project.rvt File
>Enscape Renderings W/O Watermark
>Textures Used

👇🏻Click On the Link To Get The Complete 20X50 Project File👇🏻

For any Doubt Do Contact us Via Call Or Whats app: +91-9140150831
or mail us at Pramod.work007@gmail.com

Thanks For Downloading and visiting HomeCAD.


Download 3D Home Design Ebook
👉http://bit.ly/homedesign-ebook

Check Out Our Latest Home Designs:
👉https://homecad.in/category/home-design/

How To Create Floor Plan In AutoCAD:
👉https://homecad.in/how-to-create-floor-plan-in-autocad/

%d bloggers like this: